When installing a stove in the house, you must have a clear idea which of the chimney to equip this structure. Since the pipe is a continuation of the stove chimney, you need to determine the design of the chimneys.
Typically, wall chimneys are arranged in the capital internal walls of rooms laid out of stone or brick. Although there are exceptions when the chimney is arranged in the wall external.
For such a chimney, nozzle pipes are used. A pipe is installed on a reinforced concrete, well -reinforced plate of 50 mm thick. The plate itself is laid on the oven of the furnace.
The neck of the furnace on which the nozzle pipe will be installed should not reach the attic overlap for 2-3 rows of masonry.
In order for the pipe to function well, when laying it, it is necessary to take into account all the design features, not forgetting to make a rally, otter, heads, and fluigo.
The protruding elements of the pipe are recommended to be covered with roofing steel. The pipe itself should be plastered and whitewashed with lime.
But in the case when it is not possible to install a nozzle pipe on a chimney, a root pipe is arranged. It is installed on a separate foundation.
When laying any chip pipe, in no case can you violate the dressing of the seams. Therefore, you can’t do without an experienced stovenik.
